A131 Grade AH36 A131 Grade DH36 shipbuilding steel plate--YUSHENG STEEL

A131 Grade AH36 A131 Grade DH36 Shipbuilding steel plate

Source：Yusheng steel

With the minimum yield strength at 355 Mpa, A131 Grade AH36 and A131 Grade DH36 shipbuilding steel plate and sheet are mainly used in shipbuilding and oil&ocean platform.For all the thickness in A131 Grade AH36,as rolled is ok when rolling,for the shipbuilding steel plate A131 Grade DH36 thickness above 40mm,the heat treatment shall be under TMCP or Normalized when rolling. Else,shipbuilding steel sheet A131 Grade DH36 have to be done low temperature impacting test under minus 20 centi degree,and shipbuilding steel sheet A131 Grade AH36 shall be done this test under minus zero centidegree.

For these shipbuilding steel plates A131 Grade AH36,A131 Grade DH36,yusheng steel owned thousands tons stock in our port warehouse in Shanghai and Tianjin City.These ship plates can be transported easier and faster on Board owning to they are ready on port warhouse,it would satisfy the urgent need from our customers.So please be free to contact us for our stock list for steel plates A131 Grade AH36 and A131 Grade DH36 if you need any sizes in stock.

Mechanical properties for A131 Grade AH36 shipbuilding steel sheet:

Yield strength (Mpa)

Tensile strength (Mpa)

Impacting Test

temperature (℃)

≥355

490-620

-40

Chemical composition of cast analysis for A131 Grade AH36 marine steel plate (Max %):

C	Si	Mn	P	S	Al acid	Nb
0.18	0.50	0.9/1.60	0.035	0.035	≥ 0.015	0.02/0.05
V	Ti	Ni	Cu	Cr	Mo	N
0.03/0.10	0.02	0.40	0.35	0.20	0.08	-